Sudden Hot Water System Failure: How to Do Immediately Now
Call TodayJust how do you really feel about How to Troubleshoot and Repair an Electric Water Heater?
Numerous modern-day homes use an electrical hot water heater for their heating system, as a result of its ease as well as convenience of use. Nonetheless, just like any other electric appliances, problems might emerge with its usage, suddenly. It can be actually discouraging to awaken to a cold shower rather than a hot one or having your bath with water that isn't warm adequate or perhaps as well warm. Whatever the situation may be, water heater problems can be quite nerve-racking. The good news is, we have actually made a listing of feasible solutions to your hot water heater problems. There are a number of factors that can trigger much of these problems, maybe a problem with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you turn off the main power supply for security. Whatever the issue is, getting it dealt with must not present excessive of a problem if you follow these actions:
Check Your Power Supply:
As standard as this may seem, it is really necessary. Without appropriate power, your hot water heater will certainly not work. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power issue. Inspect if the fuse is burnt out or the breaker tripped. If the circuit breaker is the problem, merely transform it on and off once more. Replace any type of damaged or damaged fuse. Evaluate the home appliance with power after these modifications to see if it's now working.
Check the Heating Element in the Water Heater:
If it's not a power trouble, after that try taking a look at your burner if it is still working. Examine each of your heating elements to be sure the problem isn't with any of them. If any of them is damaged, change that part and afterwards inspect whether the hot water is back on.
Examine Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't warm sufficient, you might require to examine the temperature level setups on your upper thermostat. Guarantee the breaker is turned off prior to doing anything. Open the accessibility panel and press the red switch for temperature level reset over the thermostat. This need to assist warm the water. Transform the breaker back on and check if the issue has been dealt with.
Call A Professional:
If after replacing all malfunctioning components as well as resetting your temperature, the water heater still isn't working, you may need to speak to a specialist plumber for a specialist opinion. The problem with your heater could be that the cold and hot faucets have been switched or it might be undersized for the quantity of warm water needed in your house. Whatever the situation may be, a professional plumber would certainly assist solve the trouble.
Verdict
Water heater problems are not always major. Many of them result from minor concerns like a blown fuse or worn-out burner. Changing the defective components should work. Nonetheless, if you are still incapable to solve the trouble, give a call to your local plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Do you enjoy reading about What Would Cause My Electric Water Heater to Stop Working?? Put a remark down the page. We would be glad to see your thinking about this write-up. In hopes to see you back again soon. Feel free to take the time to promote this page if you enjoyed it. Thank you for going through it.
Schedule And Pricing